Weighted Feed Instructions — Beurer Infant Scale

Before You Begin

• Place the scale on a firm, level surface.

• Make sure it reads 0.0 before weighing.

• If using a blanket/towel, press TARE after placing it so the display resets to zero.

• Use the HOLD function if your baby is moving, so the scale locks the reading.

• If your model only shows weight in pounds with decimals (not pounds + ounces), see the conversion tip below.

Steps for a Weighted Feed

1. First Weight (Before Feeding)

• Place baby (in dry diaper/light clothing) gently on the scale.

• Record as Pre-feed Weight.

2. Feed Baby Normally

• Feed at breast or with bottle as usual.

• Pause for burping if that’s part of your routine.

3. Second Weight (After Feeding)

• Reset the scale to zero.

• Weigh baby again and record as Post-feed Weight.

4. Calculate Intake

• Subtract Pre-feed from Post-feed.

• The difference = milk intake.

  • 1 gram ≈ 1 milliliter of milk.

Conversion Tip: Pounds with Decimals

If the scale shows decimal pounds only:

• Take the decimal portion and multiply by 16 (since 1 lb = 16 oz).

• Example: 13.50 lb = 13 lb 8 oz (0.50 × 16 = 8).

• Subtract Pre-feed from Post-feed after converting to pounds + ounces.

Sample

• Pre-feed: 13.20 lb → 13 lb 3.2 oz

• Post-feed: 13.85 lb → 13 lb 13.6 oz

• Intake = 10.4 oz

Important Notes

• Small differences are normal; intake varies each feeding.

• This is only one tool; your consultant will also look at latch, diapers, and growth.

• Always share results with your IBCLC for interpretation.